GMPLS在自动交换光网络控制平面中的应用

自动交换光网络（ASON）由于引入了控制平面才成为智能的光网络，而控制平面的具体实现要依靠通用多协议标记交换（GMPLS）协议。首先讨论ASON中的控制平面，然后对GMPLS和MPLS进行比较；最后对GMPLS在ASON控制平面中的应用进行了具体分析。     

长距离曲线顶管在杭州河坊街工程中的应用

对杭州市重点工程—杭州河坊街长距离曲线顶管进行了总结和介绍 ,可为同类工程借鉴和参考     

中国珠宝销售的可持续发展

通过对改革开放20多年来中国珠宝业发展的回顾与分析, 认为在激烈的市场竞争中, 珠宝业要达到可持续发展必须具备6个要素: (1)敬业精神; (2)信用意识; (3)创新意识和创新能力; (4)激励机制和团队精神; (5)资本营运和资源整合能力; (6)关系营销技巧.     

健康型建筑内墙涂料

叙述健康型内墙涂料技术要求和环保要求及在制漆中所涉及的原料选择、工艺、透气性与耐洗刷性的关系 ,并将此标准与欧共体生态标准进行了比较。     

Grain Growth Behavior of 5Cr21Mn9Ni4N Steel Micro-Alloyed by Rare Earth

Grain growth behavior of 5Cr21Mn9Ni4NRE steel was experimentally studied at various solid solution treatment temperatures and holding for different times. The experimental results show that the 5Cr21Mn9Ni4NRE steel has the feature of sharp austenite grain coarsening after solid solution treatment at the temperature above 1150 ℃. RE added in the steel has the benefit to restrain grain growth and increase grain growth activation energy.     

基体温度对磁控溅射沉积ZAO薄膜性能的影响

利用中频交流磁控溅射方法 ,采用氧化锌铝陶瓷靶材 [w(ZnO) =98%、w(Al2 O3 ) =2 % ]制备了ZAO(ZnO∶Al)薄膜 ,观察了基体温度对ZAO薄膜的晶体结构、电学和光学性能的影响 ,采用X射线衍射仪对薄膜的结构进行了分析 ,采用光学分度计和电阻测试仪测量了薄膜的光学、电学特性 ,采用霍尔测试仪测量了薄膜的载流子浓度和霍尔迁移率。结果表明 :沉积薄膜时的基体温度对薄膜的结构、结晶状况、可见光透射率以及导电性有较大的影响。当基体温度为 2 5 0℃ ,Ar分压为 0 8Pa时 ,薄膜的最低电阻率为 4 6× 10 -4Ω·cm ,方块电阻为 35Ω时 ,可见光 (λ =5 5 0nm)透射率高达 92 0 %。     

Average consensus in networks of dynamic agents with switching topologies and multiple time-varying delays

In this paper, we discuss average consensus problem in undirected networks of dynamic agents with fixed and switching topologies as well as multiple time-varying communication delays. By employing a linear matrix inequality method, we prove that all the nodes in the network achieve average consensus asymptotically for appropriate communication delays if the network topology is connected. Particularly, several feasible linear matrix inequalities are established to determine the maximal allowable upper bound of time-varying communication delays. Numerical examples are given to demonstrate the effectiveness and the sharpness of the theoretical results.     

Comparison of different methods to prepare MgO whiskers

Magnesia whiskers have been made by hydrolysis of MgCl₂–KCl melt and conversion of magnesium hydroxide whiskers. The morphology of MgO whiskers was examined by SEM and TEM. Composition of products was identified by XRD. Comparisons have been made on the morphology and quality of the products by different methods. Discussions have been made on the efficiency, product quality control and scale-up feasibility of these methods. Whiskers prepared by hydrolysis have uniform diameter but other shapes of magnesia are often found. Conversion of Mg(OH)₂ whiskers to MgO whiskers is simple and easy to scale-up, but the product often has many defects caused by decomposition. Nevertheless, the single crystal structure can be reserved as revealed by electron diffraction. XRD results show that the purity of products by hydrolysis is better than that by conversion. The conversion method is more hopeful for industrial production.     

Quadtree-based genetic algorithm and its applications to computer vision

Many computer vision problems can be formulated as optimization problems. Presented in this paper is a new framework based on the quadtree-based genetic algorithm that can be applied to solve many of these problems. The proposed algorithm incorporates the quadtree structure into the conventional genetic algorithm. The solutions of image-related problems are encoded through encoding the corresponding quadtrees, and therefore, the 2D locality within a solution can be preserved. Examples addressed using the proposed framework include image segmentation, stereo vision, and motion estimation. In all cases, encouraging results are obtained.